Triruthenium clusters containing mono and bidentate phosphines: Synthesis,structure, thermal reactivity and fluxional behavior

The syntheses, structures and thermal reactions of [Ru₃(CO)₉{P(C₄H₃E)₃}(μ-dppe)] (2, E = S; 3, E = O; dppe = 1,2-bis(diphenylphosphino)ethane) are described. These triphosphine-substituted clusters can be easily obtained in high yield from the Me₃NO initiated room temperature reaction between [Ru₃(CO)₁₀(μ-dppe)] (1) and P(C₄H₃E)₃. Both clusters have been structurally characterized which reveals that the functionalized phosphine P(C₄H₃E)₃ is coordinated to the remote ruthenium atom using the phosphorus atom, while the NMR spectroscopic data indicate that both clusters are fluxional in solution mainly due to the ring-flipping process involving the dppe ligand which has been probed by VT NMR spectroscopy. Thermolysis of 2 at 66 °C affords 1 via P(C₄H₃S)₃ dissociation, whilst that of 3 under similar experimental conditions also furnishes the diruthenium σ,π-furyl complex [Ru₂(CO)₆(μ,η²-C₄H₃O){μ-P(C₄H₃O)₂] (4) in addition to 1.     

压缩CO2中Co-N-C催化3-硝基苯乙烯选择性加氢反应动力学及相行为

对于苯环上含有各种可还原基团(如–C=C,–CN,–C≡C)的硝基芳烃,通过选择性加氢来制备芳香胺类化合物依然充满挑战.负载型纳米催化剂通常存在过度加氢的缺陷,虽然通过覆盖部分金属位点等方法可改善其选择性,但多是以牺牲催化活性为代价.得益于较高的原子利用率以及孤立的活性位结构,单原子催化剂在硝基芳烃选择性加氢反应中崭露头角.例如Pt1/FeOx单原子催化剂在3-硝基苯乙烯加氢反应中对目标产物的选择性高于99％,且转化频率(TOF)是Pt纳米催化剂的20倍以上.然而,已报道的单原子催化体系中,活性组分多为Pt族贵金属,且以有机溶剂为反应介质,不符合绿色化学理念.本文以环境友好型溶剂——压缩CO2为反应介质,以氮掺杂碳负载非贵金属Co单原子(Co-N-C)为催化剂,实现了3-硝基苯乙烯的选择性加氢,且反应体系中无任何有机溶剂和助剂.在温和(60 oC,3 MPa H2(RT),总压8.1 MPa)的反应条件下,3-硝基苯乙烯可完全转化,目标产物3-乙烯基苯胺的选择性达到>99％,且产物可通过简单卸压直接分离.Co-N-C单原子催化剂表现出较高的稳定性,循环使用4次以后活性并无明显降低.HAADF-STEM表征发现反应后的催化剂中,Co仍然呈单原子分散.研究发现,通过改变CO2压力(即CO2相行为)可调变H2在其中的溶解度以及在加氢反应中的反应级数,进而调变反应速率.通常认为,催化活性会随CO2压力增大呈线性增加,而本文中转化率却随CO2压力增加呈现"倒V型"曲线关系,即当体系总压为8.1 MPa(PCO2=5.0 MPa)时,转化率达到最大值(100％),而升高或降低CO2压力均会显著降低催化活性.为解释"倒V型"曲线的成因,通过含可视窗的高压釜研究了3-硝基苯乙烯/CO2/H2三元体系的相行为.发现当总压为13.4 MPa时,体系为均匀的一相(即3-硝基苯乙烯完全溶解在CO2中);而当总压为8.1 MPa时,却形成了气-液两相.用激光笔照射高压釜上部的气相时,出现了明显的丁达尔现象,说明其中溶解有少量的3-硝基苯乙烯,呈胶体分散;底部为CO2膨胀的3-硝基苯乙烯液相,且该膨胀行为通过硝基苯-CO2二元相行为研究得到证实(即在一定CO2压力下,6 mL硝基苯可被CO2膨胀至充满整个高压釜(容积为29.3 mL)).动力学研究发现,在不含CO2以及总压为11.2 MPa时,H2的反应级数为～0.5;而当总压为8.1 MPa(CO2压力为5.0 MPa)时,H2的级数降为0,说明该压力下H2的溶解度显著增加.通过Peng-Robinson方程计算了不同CO2压力下H2的溶解度,发现H2溶解度与CO2压力也呈"倒V型"曲线关系,且最高点对应的CO2压力与上述转化率-PCO2曲线一致.因此,当总压为8.1 MPa,CO2分压为5.0 MPa时形成了CO2膨胀的3-硝基苯乙烯液体,溶解入该膨胀液体的CO2促进了H2的溶解,进而使H2的反应级数降为0,从而促进了加氢反应的进行.综上,本文以压缩CO2为溶剂,以非贵金属基Co-N-C为催化剂,发展了一种3-硝基苯乙烯绿色选择性加氢途径.同时发现,改变CO2压力可调变反应体系的相行为及反应动力学行为,进而调变催化性能.该研究结果可为调变压缩CO2介质中进行的其它催化转化反应性能提供借鉴.     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Effects of Polydispersity on the Phase Behavior of Additive Hard Spheres in Solution

The ability to separate enzymes, nucleic acids, cells, and viruses is an important asset in life sciences. This can be realised by using their spontaneous asymmetric partitioning over two macromolecular aqueous phases in equilibrium with one another. Such phases can already form while mixing two different types of macromolecules in water. We investigate the effect of polydispersity of the macromolecules on the two-phase formation. We study theoretically the phase behavior of a model polydisperse system: an asymmetric binary mixture of hard spheres, of which the smaller component is monodisperse and the larger component is polydisperse. The interactions are modelled in terms of the second virial coefficient and are assumed to be additive hard sphere interactions. The polydisperse component is subdivided into sub-components and has an average size ten times the size of the monodisperse component. We calculate the theoretical liquid–liquid phase separation boundary (the binodal), the critical point, and the spinodal. We vary the distribution of the polydisperse component in terms of skewness, modality, polydispersity, and number of sub-components. We compare the phase behavior of the polydisperse mixtures with their concomittant monodisperse mixtures. We find that the largest species in the larger (polydisperse) component causes the largest shift in the position of the phase boundary, critical point, and spinodal compared to the binary monodisperse binary mixtures. The polydisperse component also shows fractionation. The smaller species of the polydisperse component favor the phase enriched in the smaller component. This phase also has a higher-volume fraction compared to the monodisperse mixture.     

含羟基基团取代的氮氧自由基构筑的三个双核稀土化合物的结构及磁性表征

以三氟乙酰丙酮(tfac)为共配体的稀土配合物分别与5-溴-2-羟基苯取代的自由基配体和5-硝基-2-羟基苯取代的自由基配体进行反应,合成3个稀土-自由基配合物[Ln2(tfac)4(NIT-5Br-2PhO)2](Ln=Gd (1),Dy (2))和[Dy2(tfac)4(NIT-5NO2-2PhO)2](3)(NIT-5Br-2PhOH=2-(2′-hydroxy-5′-bromophenyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide,NIT-5NO2-2PhOH=2-(2′-hydroxy-5′-nitrophenyl)-4,4,5,5-tetra-methylimidazoline-1-oxyl-3-oxide)。单晶结构分析表明这3个化合物中的稀土离子均通过自由基配体上的羟基氧基团连接为双核的结构。配合物1的直流磁化率表征揭示了Gd(Ⅲ)离子间的反铁磁耦合对其磁行为起主要作用。     

Cooperative Chemotaxis of Magnesium Microswimmers for Corrosion Spotting

Numerous artificial micro- and nanomotors, as well as various swimmers have been inspired by living organisms that are able to move in a coordinated manner. Their cooperation has also gained a lot of attention because the resulting clusters are able to adapt to changes in their environment and to perform complex tasks. However, mimicking such a collective behavior remains a challenge. In the present work, magnesium microparticles are used as chemotactic swimmers with pronounced collective features, allowing the gradual formation of macroscopic agglomerates. The formed clusters act like a single swimmer able to follow pH gradients. This dynamic behavior can be used to spot localized corrosion events in a straightforward way. The autonomous docking of the swimmers to the corrosion site leads to the formation of a local protection layer, thus increasing corrosion resistance and triggering partial self-healing.     

Photovoltammetric behavior and photoelectrochemical determination of p-phenylenediamine on CdS quantum dots and graphene hybrid film

A photoelectroactive film composed of CdS quantum dots and graphene sheets (GS) was coated on F-doped SnO₂ (FTO) conducting glass for studying the electrochemical response of p-phenylenediamine (PPD) under photoirradiation. The result indicated that the cyclic voltammogram of PPD on CdS–GS hybrid film became sigmoidal in shape after exposed under visible light, due to the photoelectrocatalytic reaction. Such a photovoltammetric response was used to rapidly optimize the photoelectrocatalytic activity of hybrid films composed of different ratios of CdS to GS toward PPD. The influences of scan rate and pH on the photovoltammetric behavior of PPD on CdS–GS film revealed that although the controlled step for electrochemical process was not changed under photoirradiation, more electrons than protons might participate the photoelectrocatalytic process. Furthermore, the photoelectroactive CdS–GS hybrid film was explored for PPD determination based on the photocurrent response of film toward PPD. Under optimal conditions, the photocurrent signal on CdS–GS film was linearly proportional to the concentration of PPD ranging from 1.0 × 10⁻⁷ to 3.0 × 10⁻⁶ mol L⁻¹, with a detection limit (3S/N) of 4.3 × 10⁻⁸ mol L⁻¹. Our work based on CdS–GS hybrid film not only demonstrated a new facile photovoltammetric way to study the photoinduced electron transfer process of PPD, but also developed a sensitive photoelectrochemical strategy for PPD determination.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.